3pt FAE UML/DT225 FORESTRY TRACTOR MULCHER 7' KNIFE TYPE TEETH - 1000 PTO - TREE PUSHER NOT SHOWN - 100+ HP TO OPERATE W/ CREEPER GEAR- MULCH UPTO 10" Standard equipment • Hydraulic rear hood: 2 cylinders, anti-clogging system • Body: Enclosed, dust-resistant, with centralized greasing hub and hydraulic hoses integrated in frame • Protection: Dual row protection chains, cylinder protection, adjustable skids, pressed steel counter blades welded • Drive: Trapezoidal belts in XPB, freewheel gearbox, bolt-on rotor shafts Options dealers usually add: hydraulic top link, mechanical or hydraulic guard frame / push bar, W-style self-aligning PTO, heavy-duty skids for working underground, frontal attachment for 225. What you need to run it • 3-point: Category 2, or Category 3 with bushings. For frontal mounting you need the FAE frontal attachment kit. • Hydraulics: 1 remote for rear hood. No high-flow needed, it's all PTO driven. • Tractor setup: 1000 rpm PTO, IVT/CVT or creeper strongly recommended for 0-2 mph ground speed, forestry tires and belly pan strongly recommended per FAE, slip clutch / cam clutch PTO shaft is standard. • Teeth: C/3 is the general forestry tooth. If you're mostly in brush and grass, I-type with more teeth (66+2) gives finer mulch. Replacement C/3 teeth are part #111530012-K, 46 + 2 side scrapers on the 225.